SAG582140600
System Application Guide
Revision E, November 15, 2018
Spec. No. 582140600 (Model 8100
DB
)
Page 26 of 67
P/Ns 564906 and 564907
Features
♦
These kits allow for load connections to the List 15, List 15A, List 16, List 25, List 25A, and List 26 panels at right angle to
the standard connection and also allows for use of up to 4/0 AWG wire. The lug adapters are designed for use with
2-hole lugs with 3/8” clearance holes on 1” centers. The lug adapters permit installation of cables back to back.
♦
Part No. 564906 provides one (1) busbar P/N 564905, four (4) 1/4” flat washers P/N 214110100, four (4) 1/4” split lock
washers P/N 215111100, and four (4) 1/4-20 hex nuts P/N 228557100.
♦
Part No. 564907 provides one (1) busbar P/N 564908, four (4) 1/4” flat washers P/N 214110100, four (4) 1/4” split lock
washers P/N 215111100, and four (4) 1/4-20 hex nuts P/N 228557100.
Restrictions
For use with List 15, List 15A, List 16, List 25, List 25A, and List 26.
For use with two-pole circuit breaker or 2-pole ground/return only.
Ordering Notes
1)
Order as required. Refer to Table 3 for adapter kit part numbers. Refer to Table 6 for available lugs.
Application for
Right Angle Adaptors
Left Side
(viewed from rear)
Right Side
(viewed from rear)
Top Feed Application
P/N 564907
P/N 564906
Bottom Feed Application
P/N 564906
P/N 564907
Table 3
Figure 4
582140600 List 15
582140600 List 15
P/N 564906
Right Angle
Lug Adapter Kit
P/N 564906
Right Angle
Lug Adapter Kit
P/N 564907
Right Angle
Lug Adapter Kit
P/N 564907
Right Angle
Lug Adapter Kit
Rear
Rear
P/N 564903
2-Pole Lug
Adapter Kit
P/N 564903
2-Pole Lug
Adapter Kit
