Chapter 2 Installation Instruction 7
NetSure 531 AC1 Power Supply System User Manual
Power supply
system
Battery cabinet
A
A amplified
Fixing bolt
Figure 2-4 Installing the power supply system to the battery cabinet (front view)
Installation to the wall
The installation procedures are described as follows:
1. Mark the installation points on the wall. Use the electric drill (aiguille:
Φ10) to dig holes (depth: 55mm) at the
marked points. Clean the drilled hole of dust. Put the expansion pipe into the hole and knock it in.
2. Use bolts to fix the installation assembly to the power supply system. Use plain washers, spring washers and nuts
to fix the power supply system to the wall, as shown in Figure 2-5 and Figure 2-6.
A
Installation
assembly
Bolt
Nut
A amplified
Figure 2-5 Installing the power supply system to the wall (a)
Installation
assembly
Bolt
Nut
Bolt
Figure 2-6 Installing the power supply system to the wall (b)
Summary of Contents for NetSure 531 AC1
Page 2: ......
