Some components can be extremely hot during the unit operation. Therefore, allow sufficient time for the
unit to cool down before working with the unit cabinet. Handle the unit with extreme caution and wear safety
equipment such as protective gloves, safety shoes, and arm protection while working with the hot components.
There is a risk of leaking water that can cause damage to the equipment as well as the building. There should
be an effective water drain connection and facilities. Installation should be precise. Implementation of the
application and service practices should be suitable and fault-free. Not complying with these norms will result
in water leakage from the unit. Water leakage can result in massive damage and loss of critical equipment in the
hosting ecosystem. Therefore, care should be taken to ensure that the unit must not be located directly above
any equipment that could sustain damage due to water and excessive moisture. Using a leak detection system
for the unit and system supply lines are recommended by Vertiv Co.
