Vertiv LIEBERT PSI5 MINI-TOWER PSI5-1500MT120, Installer And User Manual

Page: 23 / 58

2.4.2 Installing a 1U Model
CAUTION: Do not use the mounting brackets to lift the unit. Use the mounting brackets only to secure the
UPS to the rack.
See Figure 2.5 below to install the unit.
Figure 2.5 Installing the UPS in a rack
ITEM DESCRIPTION
1 Attach the brackets to the UPS.
2 Install the supplied rack kit into the rack.
3 Install the UPS in the rack.
2.4.3 Installing a Mini Tower (MT) Model
Place the unit upright, on its feet without blocking air inlets.
2.5 Connecting Loads
The UPS has non-programmable and programmable outlets. Plug your critical equipment (such as computer, monitors, etc.)
into the non-programmable outlets and your less-critical equipment (such as printers and other less-often used peripherals)
into the programmable outlets.
2.6 Connecting for Network Protection (Optional)
Protection from electrical surges to your computer network or telephone is provided on 2U and MT models. Use the
network/fax/modem surge-protection ports on the rear panel. Connect the “IN” port to the line from the wall jack and the
“OUT” port to your device port. Use of this feature is not required for proper operation of the UPS.
2 Installation
19