Vertiv | Liebert® GXT RT+ | Installer/User Guide
1
Important Safety Information
Comply with all warnings and operating instructions in this manual strictly. Save this manual and carefully read
the following instructions before installing the unit. Do not operate this unit before reading all safety information
and operating instructions carefully.
Transportation
Only transport the UPS system in the original packaging to protect against shock and impact.
Preparation
• Condensation may occur if the UPS system is moved directly from a cold to a warm environment. The UPS
system must be absolutely dry before being installed. Please allow at least two hours for the UPS system to
acclimate the environment.
• Do not install the UPS system near water or in moist environments.
• Do not install the UPS system where it would be exposed to direct sunlight or near a heater.
• Do not block ventilation holes in the UPS housing.
Installation
• Do not connect appliances or devices which would overload the UPS system (e.g. laser printers) to the UPS
output sockets.
• Place cables in such a way that no one can step on or trip over them.
• Do not connect domestic appliances such as hair dryers to UPS output sockets.
• Connect the UPS system only to an earthed shockproof outlet which must be easily accessible and close to
the UPS system.
• Please use only VDE-tested, CE-marked mains cable (e.g. the mains cable of your computer) to connect the
UPS system to the building wiring shockproof outlet.
• Please use only VDE-tested, CE-marked power cables to connect the loads to the UPS system.
• When installing the equipment, ensure that the sum of the leakage current of the UPS and the connected
devices does not exceed 3.5 mA.
