•
In the "Teach sensor" menu, select the sensor number that the new sensor is to be allocated (numbering from top
to bottom according to the fan positions simplifies the later localisation of the sensor).
•
No numbering is necessary when teaching-in the flow and return temperature sensors.
•
Tap on the magnifying glass icon for the teaching process.
Additional Notes:
•
To delete a sensor that has already been taught, start the teaching process for the sensor number without a
connected sensor.
•
New teaching for overwriting.
Figure 7.34
•
Before starting the teaching process, a message appears again.
•
OK starts the teaching process.
•
Cancel by using the back arrow.
Figure 7.35
•
During the search operation, "-" is displayed.
•
The process takes a few seconds.
•
Cancel by using the back arrow.
7 Operation
57
Vertiv™ Liebert® DCDactive Fan Module User Manual
