Figure 6.4 PE Connection
1.
To mount the Vertiv™ Liebert® DCD35/50 Active on the server door, loosen the screws of the lower bracket (Do
not remove!) and pull out the bracket downwards until it stops.
2.
The fan module can then be hung on the Vertiv™ Liebert® DCD with the upper bracket.
3.
To fix it in place, the lower holder must be pushed back in and the screws tightened (tightening torque 5 Nm).
Figure 6.5 on the next page shows the intended attachment options for mounting on the server door.
6 Installation and Commissioning
27
Vertiv™ Liebert® DCDactive Fan Module User Manual
