Vertiv
|
eSure™ Power Extend Converter Mounting Bracket and Door Kit Installation Manual (IM60017372)
|
Rev. C
14
[ ] 8.
Install the door grounding strap as shown in
. Torque hardware as indicated in
Figure 6:
Install Door Grounding Strap
[ ] 9.
Remove the kit supplied distribution position label (see
) from the kit supplied storage
pouch and (using the label on the front cover removed from the distribution panel as a guide)
record the distribution positions onto the kit supplied label.
[ ] 10.
Place the kit supplied distribution position label (see
) back into the kit supplied storage
pouch or remove the backing from the label and adhere it to a suitable surface near the power
system. If the kit supplied distribution position label is placed back into the storage pouch, remove
the backing from the hook-and-loop fastener factory attached to the storage pouch and adhere the
storage pouch to a suitable surface near the power system.
Install Grounding Strap
6-32 Nut with Washer
Torque to 9.6 in-lbs.
