background image

VertivCo.com    

|

  

Vertiv Headquarters, 

1050 Dearborn Drive, Columbus, OH, 43085, USA

© 2017 Vertiv Co.  All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or 

registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all 

liability, for damages resulting from use of this information or for any errors or omissions.  Specifications are subject to change without notice.

590-1509-501A

4

Summary of Contents for Avocent ACS800

Page 1: ...tem using two 2 6 32 panhead screws per bracket 2 Attaching the DIN clips to the installed wall bracket Using the supplied screws attach the DIN clips to the bottom sides of each wall bracket Be sure to orient the clips as shown in the image 3 Attaching the appliance to the DIN rail Position the appliance so that the top of each DIN clip rests on the top edge of the DIN rail Push the bottom of the...

Page 2: ...re the mounting brackets to the console system using two 2 6 32 panhead screws per bracket 2 Mounting the brackets to a plywood wall Using the slots on the bracket as a guide mark the holes on the wall where the brackets are to be fastened A minimum of two holes for each bracket should be marked Use a 1 8 inch drill bit to drill guide holes at the marked positions Secure each bracket to the plywoo...

Page 3: ...ount shelf from the accessory kit box and place it upside down on top of the console system Align the countersink screw holes on the shelf with the mating holes in the slotted brackets on the console system Secure the console system to the shelf with two 2 6 32 flathead screws for each bracket 3 Securing the power cords Plug the power cord into the console system Slip the supplied cable retention ...

Page 4: ...names and logos referred to are trade names trademarks or registered trademarks of their respective owners While every precaution has been taken to ensure accuracy and completeness herein Vertiv Co assumes no responsibility and disclaims all liability for damages resulting from use of this information or for any errors or omissions Specifications are subject to change without notice 590 1509 501A ...

Reviews: