Vertiv™ NetSure™ IPE Series -48 VDC Outdoor Rectifier Installation and User Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
52
3.4
Rectifier Ground Connection
3.4.1
General
For grounding requirements, refer to current edition of building installation, local codes and your specific site requirements.
3.4.2
Positive Grounding
As default, the power system is not positive grounded. Connect the grounding wire as shown in Figure 3.2 to ground positive, if
required.
3.4.3
Chassis Grounding
Connect the rectifier Chassis to the site grounding point with a two-hole lug. Lugs should be crimped per lug manufacturer’s
specifications. Refer to Figure 3.1 for location.
Figure 3.2 Rectifier Grounding Location
