Vertiv™ NetSure™ IPE Series -48 VDC Outdoor Rectifier Installation and User Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
50
3
Making Electrical Connections
3.1
Important Safety Instructions
DANGER!
Adhere to the “Important Safety Instructions” starting on page vii.
ALERT!
Wear an ESD wrist strap (see “Static Warning” on page x).
WARNING!
Rectifier warranty will be VOID if any perimeter screw is tampered with. DO NOT loosen or remove any
perimeter screw. Removal of outer perimeter screws is a safety hazard.
NOTE!
If the rectifier’s front access panel is opened during installation, ensure the access panel is securely closed and
the screws are torqued to 2.5 Nm.
3.2
Wiring Considerations
All wiring and branch circuit protection should follow the local national electrical building standards.
3.3
Rectifier Interface Overview Diagrams
Refer to Figure 3.1 for rectifier interface overview diagrams showing electrical connection points.
Figure 3.1 Rectifier Interface Overview Diagrams
Front View
Bottom View (PG Terminal)
QUICK CONNECTOR
PG CONNECTOR
Antenna
(R48-2000C2-1 )
(R48-2000C2-3
）
(R48-2000C2-2)
RemovableAccess Panel
with Phillips sc
rewdriver
RemovableAccess Pane
with Phillips screwdriver
RemovableAccess Panel
with Phillips screwdriver
CAN&Alarm
interface
Load output
interface 1
Battery
interface
Load output
interface 2
Load output
interface 3
Power input
interface
