Vertical CONVERSip Edge 300, User Manual

Page: 38 / 48

E
STABLISHING A
C
ONFERENCES
Edge 300 User Guide
- 34 -
E
STABLISHING A
C
ONFERENCES
You may wish to create a conference call with other parties. These
conferences can either be Private or Public. You can have up to six
attendees in a conference room if your system is networked, or seven
attendees if your system is standalone.
Note: There are a limited amount of conferences
allowed on the MP5000 system. Once this limit is
reached, you cannot create a new conference until an
established conference ends.
Private Conferences
In a Private conference, you and two other parties are transferred to a
conference room. You can only be a member of one Private conference at
a time. You can set up a private conference using a SIP or Digital phone.
S
ET
U
P A
P
RIVATE
C
ONFERENCE
C
ALL
FROM A
SIP (
NOT A
D
IGITAL
P
HONE
)
1) Place or receive a call to/from the first party you want to include in a
Private conference.
2) Perform the same steps as a supervised transfer (see “Transferring
a Call” on page 32).
3) When the second party answers, instead of pressing the END soft
key or hanging up, press the CONF soft key or the TRANS/CONF
button.
OR
In the idle state, press the TRANS/CONF button, then the ADD soft
key.
Set Up a Private Conference Call (continued on next page)