Using a Digital Phone
6
-
39
About Wave Digital Phones
Wave Phone User Guide
Using a Digital Phone
Line Appearance Buttons
All phones have a primary line button. Your phone may also include one or more secondary line
appearance buttons as well as outside line buttons. Each line button has a corresponding status
LED beside it:
•
A line is idle when the LED is not lit.
•
A line with a red LED is in use and you cannot join the call.
•
A line with a green LED indicates a call connected to your phone.
•
A line with a flashing green LED indicates a call connected to another phone that you can
join.
Primary Line Button
Your primary extension number is assigned to one of the pre-programmed feature buttons on
your phone. Your extension number should appear on the label strip next to your primary line
button. If your phone is idle and you take it off hook, the LED next to the line button will light
up, and the extension number will be displayed.
Secondary Line Buttons
You may have one or more secondary lines assigned to your phone. These additional lines can
be primary lines that appear on other phones. You can use these additional lines to make or
receive phone calls.
Outside Line Buttons
You may have one or more outside lines assigned to your phone. These lines allow you to make
and receive external calls without entering an external access code. Some systems require a user
to dial 9 prior to dialing an external phone number. With outside lines, dialing 9 is not required.
On Idle Outside Lines
When an outside line is idle, the following features are supported on outside line keys:
Note:
No other features are supported on idle outside line keys. Feature codes are ignored while
dialing on an outside line.
• Flash (to restart dialing)
•
Release (when programmed)
Wave 4.0
June 2013