4. Start-up Flush - Same as for Model PWC-1000 (see sec. 5.4)
5. Tank Flush
Flush tanks out by draining all water through the drain plug located on the
back of the cooler. Let the tanks fill again with the filtered water. When full,
drain water again through the drain ports located on the back as well as
through the dispensing spigot. The dispense function will only work if the
cooler is plugged in. When the tank has filled again automatically with fil-
tered water, the cooler is ready to dispense water.
Back view of Cooler Water Connections Model PWC-1800
Front of Model PWC-1800 cooler with door opened
Hot Tank Reset
(Clockwise)
Drain Plug
Hot Tank Inside
(Optional)
(Optional)
(RO Only)
Drain Connection (For RO Only)
Shown with optional RO system
6. Filter Change - See Section 8.0
- 17 -
