28
2014/11/4 V1.0+V1.0
4.4.6. WATT MODE
：
it is WATT CONTROL MODE
1. Under start/steady window, press WATT, program windows will show
『
WATT
』
,Data
windows moves left and show words
『
PRESS ENTER TO BEGIN PROFILE.
』
2. Press ENTER to modify Target WATT. Data windows moves left and show words
『
ENTER WATT <25-400>
』
, USER can input number 0~9 to input Target WATT, Data
windows will show
『
WATTS= xxx
』
and flash the input value. Press the
number key for modify must be 2~3 numbers(range is 25 ~ 400). Unreasonable value
will auto change to show min or max value, input the reasonable value and press
ENTER to confirm and store it.
3. Press ENTER for time modify, data windows will show words
『
ENTER TIME <10 - 60 >
MINUTOS
』
, (range is10 ~ 60). Program windows show default value
『
10
』
and flash
the value. Press number 0~9 for modify and you must input 2 numbers(range is 10 ~
60). Unreasonable value will auto display default value, input the reasonable value and
press ENTER to confirm the value and start program.
4. Press Enter Key to start to accumulate after finishing setting the time of final one item.
Presuppose damping as Level 1, and there is new line once per minute; Presuppose
Stride as 0. Current segment number will be displayed in information window when
changes happen to Stride.
『
RPM↑
』
icon will be displayed in program control window
when PRM is less than 40 hours, and pause mode will be entered after 5 seconds.
5. When program finishing or working, press STOP Key and program windows will auto
show original Profile figure, data windows will show below training accounting items for
2 seconds by turns for twice, then program will back to start/steady condition.
6. During program working, data windows will show below information
：
metric
『
KMH
』：
show
『
LEVEL
』、『
RPM
』、『
DIST
』、『
WAT
』
first for 1s and show
value for 10 seconds, then show
『
LEVEL
』、『
KMH
』、『
TIME
』、『
CAL
』
first for 1s
and show value for 10 seconds.
imperial
『
MLH
』
：
show
『
LEVEL
』
、
『
RPM
』
、
『
DIST
』
、
『
WAT
』
first for 1s and show
