3.0 Description
2
Figure 1
Flow Schematic
3.1 Assembly
The model 9100 provides water at 2 temperatures, hot and cold, dis-
pensed from one spigot. The flow schematic is shown in the figure below. Water
flows from the filtration system into the auxiliary reservoir. This tank is at the
same level as the one gallon chilling chamber, which is filled by the auxiliary
reservoir. The cold water drinking line is comprised of a sealed stainless steel
coil submerged inside of this chilling chamber. There is a separate hot water
tank with an internal heater coil which is fed by gravity from the auxiliary reser-
voir. The water level is controlled by a valve and float ball assembly. The com-
pressor and expansion valve are inside the cabinet. The controls for dispensing
water are on the front panel. The 9100 is available with reverse osmosis (R) or
standard filter (F) versions.
