Vertex Standard VX-920E Series, Operating Manual

Page: 24 / 32

22
VX-920E S
EriES
O
pErating
M
anual
a
DVanCED
o
pEration
g
roup
u
p
/D
oWn (
16-
KEy
& 4-
KEy
V
Ersion only
)
Press the assigned programmable key to select a dif-
ferent group of channels. Once the desired Group is
reached, rotate the CH Selector knob to select the de-
sired channel within the selected Group.
You may wish to have the Scanner pass through more
than one Group during the scanning process (normally,
scanning is performed within the current group only).
To include the current Group in the scanning loop,
press and hold in the assigned programmable key for
one second. To remove a Group from Group Scan,
press and hold in the assigned programmable key
again for one second.
Multi-Group Scanning is only possible if you are us-
ing the “User Scan” list. To edit the User Scan list,
press and hold the assigned programmable key for
one second to delete the current Memory Group from
the Scanning. Alternatively, press and hold the as-
signed programmable key for one second to delete the
Current Memory channel from the Scanning. When
you delete a Group or channel, “ -SCAN Skip- ” will
appear on the LCD for one second after pressing the
assigned programmable key. To restore a particular
channel to your scanning list, press and hold in the
assigned programmable key again for one second;
“ -SCAN Stop- ” will appear on the LCD for one sec-
ond after pressing the assigned programmable key.
C
hannEl
u
p
/D
oWn
(
16-
KEy
& 4-
KEy
V
Ersion only
)
Press the assigned programmable key to select a dif-
ferent channel within the current group.
s
Et
(
16-
KEy
& 4-
KEy
V
Ersion only
)
Press the assigned programmable key to activate the
“User Set” (Menu) Mode. See page 28 for details
Call/rEsEt
While the DTMF Paging System
This feature, if enabled, allows the user to change the
3-digit Page Call code, used to call other similarly-
equipped stations. Press the assigned programmable
key, followed by the three digits representing the Page
Call code of the station you wish to call. Three tones
will be heard after the last key is pressed (the new
code will now be transmitted). The receiver squelch
of the other station will be opened, and you can begin
communication.
While the 2-Tone/5-Tone Paging System
This feature, if enabled, press the assigned program-
mable key to send a 2-tone/5-tone sequential tone.