20
VX-920E S
EriES
O
pErating
M
anual
a
DVanCED
o
pEration
tx s
aVE
D
isaBlE
Press the assigned programmable key, or set the
TOGGLE
switch to the assigned position to disable
the Transmit Battery Saver, if you are operating in a
location where high power is almost always needed.
The Transmit Battery Saver helps extend battery life
by reducing transmit power when a very strong signal
from an apparently nearby station is being received.
Under some circumstances, though, your hand-held
radio may not be heard well at the other end of the
communication path, and high power may be neces-
sary at all times.
E
nCryption
(
r
EquirEs
thE
FVp-35
or
FVp-36
)
Press the assigned programmable key to toggle the
Encryption feature “On” and “Off”.
l
oCK
Press the assigned programmable key, or set the
TOG-
GLE
switch to the assigned position to lock the
VX-
920E
’s knob, programmable keys, and
PTT
switch.
The precise lockout configuration is programmed by
your Dealer.
Press the key again, or set the
TOGGLE
switch to a
different position to disable the Lock function.
F
olloW
-m
E
s
Can
The “Follow-Me” Scan feature checks a User-
assigned Priority Channel regularly as you scan other
channels. Thus, if only Channels 1, 3, and 5 (of the 8
available channels) are designated for “Scanning”, the
user may nonetheless assign Channel 2 as the “User-
assigned” Priority Channel via the “Follow-Me” fea-
ture.
To activate “Follow-Me” scanning, first select the
channel you want to designate as the “User-Assigned
Priority Channel” and press the assigned program-
mable key, or set the
TOGGLE
switch to the as-
signed position. Then rotate the
CH
Selector knob to
recall to the “Scanning Start” channel which has been
programmed by your dealer to activate the scanner.
When the scanner stops on an “Active” channel, the
User-assigned Priority Channel will automatically be
checked every few seconds; if activity is found on the
User-assigned Priority Channel, the radio will switch
between it and the Dealer-Assigned Priority Channel,
if any.
