SPECIFICATIONS
1. Detection Method: Passive Infrared Sensor (PIR). PIR measures infrared light radiating from objects in its
field of view. Apparent motion is detected when infrared levels change.
2. Sensor Range: 65Ft / 20m x 220 degree spread
3. Power Source: 120VAC/60Hz, 36.2W
4. With AC COB LED Chip: 2pcs * 16W
5. Load Rating: No extra lights should be added to this unit
ADVANTAGES OF LED’S
1. Energy saving – much lower power consumption and cost savings.
2. Solid State lighting – no filament to break.
3. No forward heat & low fitting heat. Much safer.
CARE AND CLEANING
1. To prolong the original appearance, clean with clear water and a soft, damp cloth only.
2. Do not use paints, solvents, or other chemicals on this light fixture. They could cause a premature
deterioration of the finish and will not be covered by the warranty.
3. Do not spray with a hose or water power washer.
17
