Assembly of the toy vehicle
Please ensure that the
scooter
will only be used for playing when assembly has been carried out correctly, and
checked, by an adult.
The toy vehicle must be assembled carefully by an adult person. Study the assembly instructions carefully
before beginning work. Assemble the vehicle in the exact sequence shown by the letters in the diagrams. This is
essential for the safe function and use of the wagon.
Please note that there is always a danger of injury when working with tools or doing manual work. Therefore
please be careful when assembling this product.
Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying
around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk
of suffocation if children play with plastic bags!
Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the
locknuts by hand until resistance is felt, then use wrench to finally tighten nuts completely against resistance
(locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts
have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced.
When assembling plastic grips: The grips can be pushed onto the handlebars more easily if they are first soaked
in warm water.
Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.
For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing
plugs).
Spare Parts listed at back of manual
When ordering spare parts, always state the full article number, position number, the quantity required.
Example order:
Model # 84-182/ position no. 2/1 piece
Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.
Goods may
only
be returned after prior arrangement and in (internal) packaging, which is safe for
transportation, in the original box if possible. It is important to provide a detailed defect description / damage
report!
Important:
spare part prices do not include fastening material; if fastening material (bolts, nuts,
washers etc.) is required, this should be clearly stated on the order by adding the words
„with fastening
material“
.
Waste Disposal
KETTLER
®
products are recyclable. At the end of its useful life please dispose of this article correctly and
safely (local refuse sites).
KETTLER
®
International Inc. · 1355 London Bridge Road · VA 23453 USA
www.kettlerusa.com
Before Assembly
USA
4
