Home
/
Versitron
/
SG24816M
/
User Manual

Versitron SG24816M, User Manual, Page: 141 / 241

Share

Page: 141 / 241

Versitron SG24816M User Manual Download Page 141

User Manual

133

www.versitron.com

SG24816M

Function name:

Loopback Test

Function description:

In the Loopback Test function, there are two different loopback tests. One is
Internal Loopback Test and the other is External Loopback Test. The former
test function will not send the test signal outside the switch box. The test signal
only wraps around in the switch box. As to the latter test function, it will send
the test signal to its link partner. If you do not have them connected to active
network devices, i.e. the ports are link down, the switch will report the port
numbers failed. If they all are ok, it just shows OK.

Note: Whatever you choose Internal Loopback Test or External Loopback Test,

these two functions will interfere with the normal system working, and all
packets in sending and receiving also will stop temporarily.

Fig. 3-70

«
...
139
140
141
142
143
...
»

Summary of Contents for SG24816M


















































































































































































































































Reviews:

No comments