-18-
VERSITRON
SF71060M & SF71060MP
Revision A3
2.7 Powered via PoE over Cat.5 (SF71060M)
Port 2 is equipped with the function of receiving power from a connected PoE PSE device over Cat.5 cable.
The remote PoE PSE devices can be a mid-span PoE injector or end-span PoE switch.
The switches can support the following PSE:
802.3af compliant PSE (Typical, Type 1 PSE)
Possible voltages received: +36 ~ +57VDC
802.3at compliant PSE (High power PoE, Type 2 PSE)
Possible voltages received: +42.5 ~ +57VDC
2.8 Reset Button
The reset button is used to perform a reset of the switch. It is not used in normal cases and can be used for
diagnostic purposes. If any network problem is suspected, it is useful to push the button to reset the switch
without turning off the power. Check whether the network has recovered.
The button can also be used to restore the software configuration settings to factory default values.
The operations are:
Operation
Function
Press the button and release during switch operation
Reset & boot up the switch. The behavior is
same as power boot procedure.
Press the button until MNGT-LED is steady ON
Boot & restore all factory default settings
