-16-
VERSITRON
SF71060M & SF71060MP
Revision A3
Three 2P terminal plugs are provided with the switch. Two of the three plugs are used for Vdc interfaces
respectively. The plug is shown below:
184B
Power wires : 24 ~ 12AWG (IEC 0.5~2.5mm
2
)
Install the power source wires into the plug properly, and then install the terminal plug into the switch. If
daisy-chaining power to another switch device is required, install the power wires and then install the terminal
plug into each switch. Then, use the other Vdc contacts.
Note:
1.
Only up to four device units can be daisy-chained to receive power from one main power input source.
2.
The maximal length of the power wire is 1 meter.
