10
www.versitron.com
4. If you want to configure VLAN by yourself, use function 2 to setup VLAN group and
PVID of ports. Use "VLAN Setup" to create VLAN groups first. Then set PVID and
tag/untagged of ports.
m
: modify setting of VLAN group. Select the VLAN group first and the connection port.
Then select the operation - add or remove the port to/from the VLAN.
a
: add ports to VLAN. Select the VLAN group first and then select the ports to add to
the VLAN group.
d
: delete VLAN group. This function will delete one VLAN group.
q
: quit from this function. "Save & Update (Y/N)" message will be prompted to ask you
if you want to save and update to this new setting.
5. Then, we use "
PVID Setup
" function to set the PVID of ports.
After you complete the VLAN groups setup, you have to set the PVID of ports to the
VLAN ID of their VLAN group. If port overlapping happens, please assign the PVID of
the overlapped port to the VLAN ID that it will use for packet transmitting VLAN
grouping.
If tagged packets, VLAN ID is in the tag of the packets. If untagged packets, the switch
will assign PVID to the packet as its VLAN ID. And the switch will check the VLAN
group setting with the VLAN ID. If they belong to the same VLAN, the packets will be
forwarded. If they belong to different VLANs, the packets will be filtered out.
Note: Because this switch supports VLAN ID 0~15 only, the switch will use bit 0~3 of the
VLAN ID as its VLAN ID if the VLAN ID in the tagged packets are larger than 15.
