www.versitron.com
15
2.4 Making the TP Port Connection
TP port is featured to support connection to:
•
Auto-negotiation devices
•
Auto-negotiation incapable 10BASE-T devices
•
Auto-negotiation incapable 100BASE-TX devices
Network Cables
10BaseT:
2-pair UTP Cat. 3, 4, 5, EIA/TIA- 568 100-ohm STP
100BaseTX:
2-pair UTP Cat. 5, EIA/TIA-568 100-ohm STP
Link distance: Up to 100 meters
Configuration Setup
To make a proper connection, the following configuration settings are
recommended:
TP port link partner
SW1
SW2
SW3
Auto-negotiation device
Off: auto
Off: full duplex
Off: 100M
Fixed 10M half-duplex device
On: forced
On: half-duplex On: 10M
Fixed 100M half-duplex device On: forced
On: half-duplex Off: 100M
Fixed 10M full duplex device
On: forced
Off: full duplex
On: 10M
Fixed 100M full duplex device On: forced
Off: full duplex
Off: 100M
