Versatile AutoBoom SX275, Installation Manual

Page: 38 / 62

Chapter 4
34 Versatile SX275 AutoBoom™ Installation Manual
Mount the AutoBoom Valve
FIGURE 1.
AutoBoom Valve Mounted on the Valve Mounting Plate
1.
Secure the AutoBoom valve (P/N 063-0131-124) to the mounting plate (P/N 107-0171-802) using four 5/16”
hex bolts (P/N 311-0052-104) and four 5/16” lock washers (P/N 313-1000-019).
FIGURE 2.
AutoBoom Valve Mounted on the Sprayer
2.
Secure the mounting plate to the machine’s center rack top-right parallel link using two 4” W x 5” L x 3/8”
thread U-bolts (P/N 107-0171-606) and four 3/8”-16 zinc flanged lock nuts (P/N 312-1001-164).
Install the Pressure and Tank Hoses
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized. When disconnecting or purging
hydraulic hoses, be aware that the hydraulic
fluid within the machine’s system may be
extremely hot and under high pressure.