14105
Avalon
Boulevard,
Los
Angeles,
CA
90061
|
Tel
310-353-7100
|
Fax
310-353-7109
www.VersaTables.com
Slide the two
center rails
into the two
end frames
ensuring:
a) Center rail slots face inward
b) Center rail slots are closer to the top edge
when the assembly is upside down
(as shown in inset)
Attach
end frame with L-bracket (A)
to
end frame
with threaded-inserts (B)
using (4)
M6x10
machine screws
.
Place
desktop
with pre-drilled holes and
pre-installed inserts facing up. (We
reccomend placing them on cardboard,
blanket, rug, etc. to protect surface)
Adjust the width of the
desk base
by
sliding the two
end frames
outward.
Align the holes on the
desk base
and the
underside of the
desktop.
Attach the
desk base
to
desktop
with
twelve (12)
1/4-20 Phillips Bolts
for the
side bracket
holes going into the inserts.
Use five (5)
M5x20 Wood Screws
for the
end frame
holes going into the
desktop
.
Assembly
Step 4
Step 6
Step 5
B
A
M5x20 Wood Screw
x5
1/4-20 Phillips Bolt
x12
NOTE:
Do
NOT
tighten all the way.
M6x10 Machine screw
x4
