VersaLogic VL-EPM-31, Hardware Reference Manual, Page: 50 / 77

Video Interfaces
EPM-31 Hardware Reference Manual
49
Table 13: J3 Mini DisplayPort Connector Pinout
Pin Signal Pin Signal
1 GND 2 HOT PLUG DETECT
3 ML_LANE0_P 4 CONFIG 1
5 ML_LANE0_N 6 CONFIG 2
7 GND 8 GND
9 ML_LANE1_P 10 ML_LANE3_P
11 ML_LANE1_N 12 ML_LANE3_N
13 GND 14 GND
15 ML_LANE2_P 16 AUX_CH_P
17 ML_LANE2_N 18 AUX_CH_N
19 RTN 20 DP_POWER
Console Redirection
The EPM-31 can be configured for remote access by redirecting the console to a serial
communications port. The BIOS setup utility and some operating systems (such as MS-DOS) can
use this console for user interaction. The default settings for the redirected console are as
follows:

115,200 baud rate

8 data bits, no parity

1 stop bit)

No parity

No flow control