Configuration and Setup
Tetra (VL-EPC-2700) User’s Guide
15
Table 3. Jumper Information
EPC-2700
Reference
Designator
EPC-2700
Signal Name
Control/Description
V1
BOOT_MODE0
BOOT_MODE0 setting, to allow use
of USB OTG Device communications
using the NXP i.MX6 Serial
Downloader method. When this
jumper is installed V2 should not be
installed! Normal eFuse selected
boot via SPI NOR Flash U-Boot and
microSD card Yocto Linux when the
jumper is removed.
V2
USB_OTG_ID
Install jumper to set USB_OTG port to
host mode. No jumper sets port to
Device Mode