manualshive.com logo in svg

VersaLogic EPM-5, Reference Manual

Share
Download
VersaLogic EPM-5 Reference Manual Download Page 18

Configuration and Setup 

EPM-5 Reference Manual 

12 

Plug-n-Play Configuration 

 

 

+------------------------------------------------------------------------------+ 
|                System BIOS Setup - Plug-n-Play Configuration                 | 
|            (C) 2005 General Software, Inc. All rights reserved               | 
+---------------------------------------+--------------------------------------+ 
| Enable PnP Support       :>Enabled    | Enable PnP O/S           : Enabled   | 
|                                       |                                      | 
| Assign IRQ0 to PnP       : Disabled   | Assign IRQ8 to PnP       : Disabled  | 
| Assign IRQ1 to PnP       : Enabled    | Assign IRQ9 to PnP       : Disabled  | 
| Assign IRQ2 to PnP       : Enabled    | Assign IRQ10 to PnP      : Disabled  | 
| Assign IRQ3 to PnP       : Enabled    | Assign IRQ11 to PnP      : Enabled   | 
| Assign IRQ4 to PnP       : Disabled   | Assign IRQ12 to PnP      : Enabled   | 
| Assign IRQ5 to PnP       : Enabled    | Assign IRQ13 to PnP      : Enabled   | 
| Assign IRQ6 to PnP       : Disabled   | Assign IRQ14 to PnP      : Enabled   | 
| Assign IRQ7 to PnP       : Disabled   | Assign IRQ15 to PnP      : Enabled   | 
|                                       |                                      | 
| Assign DMA0 to PnP       : Disabled   | Assign DMA4 to PnP       : Enabled   | 
| Assign DMA1 to PnP       : Disabled   | Assign DMA5 to PnP       : Enabled   | 
| Assign DMA2 to PnP       : Disabled   | Assign DMA6 to PnP       : Disabled  | 
| Assign DMA3 to PnP       : Enabled    | Assign DMA7 to PnP       : Enabled   | 
+---------------------------------------+--------------------------------------+ 

Shadow Configuration 

 

 

+------------------------------------------------------------------------------+ 
|                System BIOS Setup - Shadow/Cache Configuration                | 
|            (C) 2005 General Software, Inc. All rights reserved               | 
+---------------------------------------+--------------------------------------+ 
| Shadowing               :>Chipset     | Shadow 16KB ROM at C000 : Enabled    | 
| Shadow 16KB ROM at C400 : Enabled     | Shadow 16KB ROM at C800 : Disabled   | 
| Shadow 16KB ROM at CC00 : Disabled    | Shadow 16KB ROM at D000 : Disabled   | 
| Shadow 16KB ROM at D400 : Disabled    | Shadow 16KB ROM at D800 : Disabled   | 
| Shadow 16KB ROM at DC00 : Enabled     | Shadow 16KB ROM at E000 : Enabled    | 
| Shadow 16KB ROM at E400 : Enabled     | Shadow 16KB ROM at E800 : Enabled    | 
| Shadow 16KB ROM at EC00 : Enabled     | Shadow 64KB ROM at F000 : Enabled    | 
+---------------------------------------+--------------------------------------+ 

Note:

 

Due to changes and improvements in the system BIOS, the information on your 
monitor may differ from that shown above

. 

 

Operating System Installation 

The standard PC architecture used on the EPM-5 makes the installation and use of most of the 
standard x86 processor-based operating systems very simple. The operating systems listed on the 

VersaLogic OS Compatibility Chart

 use the standard installation procedures provided by the 

maker of the OS. Special optimized hardware drivers for a particular operating system, or a link 
to the drivers, are available at the EPM-5 Product Support web page at 

http://www.VersaLogic.com/private/pumasupport.asp

.

 

 

 
 

Summary of Contents for EPM-5





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands