Configuration and Setup
EPM-5 Reference Manual
9
Figure 3. Typical Start-up Configuration
1. Attach Power
Plug the power adapter cable CBL/CBR-1008 into socket J9. Attach the motherboard
connector of the ATX power supply to the adapter.
2. Attach Cables and Peripherals
Plug the video adapter cable CBL/CBR-1201 into socket J1. Attach the video monitor
interface cable to the video adapter.
Plug the breakout cable CBL-5009A into socket J8. If necessary, attach the breakout
board CBL-5010B to the cable. (The cable and board are shipped attached.)
Plug a USB keyboard and USB floppy drive into socket J4 of the breakout board.
Plug the hard drive data cable CBL/CBR-4406 into socket J7. Attach a hard drive and
CD-ROM drive to the connectors on the cable. If the hard drive is 3.5”, use the 2mm to
0.1” adapter CBL/CBR-4405 to attach the IDE cable.
Attach an ATX power cable to any 3.5” drive (hard drive or CD-ROM drive).
OS Installation
CD-ROM
Hard
Drive
CD-ROM
Drive
CBR – 5010B
J4
J1
CBR– 1008
USB Keyboard
and USB Mouse
Power
to
Drives
Analog SVGA
CBR– 1201
J1
J9
J7
J8
EPM-5
“Puma”
CBR – 5009A
CBR– 4406
ATX
Power Supply
