Appendix E - Command Line Interface
97
set dnsserver
Set DNS Server IP Address
set dot1xdynkeyupdate Set 802.1x Dynamic Key Update Mode
set dot1xdynkeylife
Set 802.1x Dynamic Key Life Time (in Minutes)
set dot1xkeytype
Set 802.1x Distribute Key Method
set fragthreshold
Set Fragment Threshold
set gateway
Set Gateway IP Address
set groupkeyupdate
Set Group Key Update Mode
set
groupkeyupdateinterval
Set Group Key Update Interval (in Minutes)
set http Set HTTP Mode
set httpport Set HTTP Port Number
set https Set HTTPS Enable/Disable
set httpsport Set HTTPS Port Number
set ipaddr Set IP Address
set ipmask Set IP Subnet Mask
set isolation Set Isolate All Virtual APs State
set key Set WEP Key Value
set keylength
Set WEP Key Length
set lltd
Set LLTD Mode
set md5supplicant
Set 802.1x MD5 Supplicant Mode
set md5suppname
Set 802.1x Supplicant MD5 Name
set md5supppassword
Set 802.1x Supplicant MD5 Password
set md5supptype
Set 802.1x MD5 Supplicant Type
set nativevlanid
Set Native VLAN ID
set ntp
Set NTP Server IP Address
set operationmode
Set operation Mode
set password
Modify Login Password
set psk Modify Pre-shared Key
set radiusserver
Set RADIUS IP Address
set radiusport
Set RADIUS Port Number
set radiussecret
Set RADIUS Shared Secret
set remoteptmp
Set PTMP's Remote MAC Address List
set remoteptp Set Remote PTP MAC Address
set roguedetect
Set Rogue AP Detection Mode
set rogueinteval
Set Interval of Rogue AP Detection(Range: 3 ~ 99)
Summary of Contents for VX-AP310N
Page 1: ...VX AP310N Wireless Access Point User s Guide V1 01 ...
Page 2: ......
