1 (800) 465-1660
American Manufacturing
Lifetime Warranty
Protected by US Patent No. 10,485,336 & 10,849,424
VERSA DESK
®
Assembly Instructions
VERSA DESK
®
Attach
end frame with L-bracket (A)
to
end
frame with threaded-inserts (B)
using (4)
M6x10 machine screws
.
Place
desktop
with pre-drilled holes and
pre-installed inserts facing up. (We
reccomend placing them on cardboard,
blanket, rug, etc. to protect surface)
Adjust the width of the
desk base
by
sliding the two
end frames
outward.
Align the holes on the
desk base
and
the underside of the
desktop.
Attach the
desk base
to
desktop
with
eight (8)
1/4-20 Phillips Bolts
for the
side
bracket
holes going into the inserts. Use
four (4)
M5x20 Wood Screws
for the
end
frame
holes going into the
desktop
.
Step 4
Step 6
Step 5
M5x20 Wood Screw
x4
1/4-20 Phillips Bolt
x8
B
A
NOTE:
DO
NOT
tighten all the way yet.
M6x10 Machine screw
x4
Slide the two
center rails
into the two
end frames
ensuring:
a) Center rail slots face inward
b) Center rail slots are closer to the top edge
when the assembly is upside down
(as shown in inset)
