9
3. ELECTRICAL CONNECTION
Electrical Connection can be done by installing an outlet in
the cabinet and securing a plug onto the wires from hood or
bringing wires into hood as shown below.
a.
Verify that power is turned off at the source.
b.
Make electrical connections with wire nuts (Purchased Separately)
as shown. If house wiring is not 2-wire with a ground wire, a
ground must be provided by the installer.
4.
Completion
a.
Turn Power back
“ON” from the Circuit or Fuse box.
b.
Activate blower and lights to confirm proper function.
c.
Remove ALL protective film from the exterior of your hood and
filters.
INSTALLATION
Green or Bare = Ground
Black = Hot
White = Neutral
