22
B
A
B
A
5
Fig. 5.9
Stop notch
Do not use this step
Guard
rail
Fig. 5.10
Fig. 5.12
OVEN SHELF INSTALLATION AND
REMOVAL
•
Assemble the wire racks to the oven walls using
the 2 screws (Fig. 5.9).
•
Slide in, on the guides, the shelf (fig. 5.10). Do
not use the first step from the top.
The shelf must be fitted so that the stop notch
(which stops it sliding out) and the guard rail face
the inside of the oven.
•
Position the broiling pan above the oven shelf
(see page 18).
•
To dismantle, operate in reverse order.
REPLACING THE OVEN LIGHT
(fig. 5.11)
Before any maintenance is started involving electrical
parts of the appliance, it must be disconnected from
the power supply.
•
Let the oven cavity and the heating elements cool
down.
•
Switch off the electrical supply.
•
Remove the protective cover “
A
” (fig. 5.11).
•
Unscrew and replace the bulb “
B
” with a new one
suitable for high temperatures (300°C) having the
following specifications: 120V, 60 Hz, E14 and
same power (check watt power as stamped in the
bulb itself) of the replaced bulb.
•
Refit the protective cover.
NOTE:
Oven bulb replacement is not covered by your
warranty.
STORAGE COMPARTMENT
The storage compartment is accessible through the
pivoting panel (fig. 5.12).
Fig. 5.11
WARNING !!
Do not store flammable material
in the oven or in the storage com
-
partment.
