Page 55 of 18
Networking
Wireless
Notification
Serial to Wi-Fi converter can support both
type of IP such as Static IP or DHCP/BootP
IP configuration.
After modifying configuration click the
icon of “Apply Only” or “Apply and Save”
for finishing IP configuration.
You can use the wireless item for
configuring Serial to Wi-Fi Converter’s
Wi-Fi parameters. “SSID Scan” is for
searching the available wireless access
point and to select your AP device.
“Wireless Encryption” is for setup
parameters as encryption type and key.
Save the changes by using “Apply Only”
or “Apply and Save”.
Serial to Wi-Fi
converter can support 3
ways of event
notification e.g “SNMP
Trap”, “Email
Notification” and
Syslog Notification.
