83D4009
VLI31 Fireplace Insert
37
BLOWeR ReMOVAL and ASSeMBLy
BLOWeR RePLAceMeNt
Turn off the unit and allow to cool completely. Turn off gas at shut-off and disconnect all
electricity to unit.
1. Remove the decorative filigree by gently pulling it out.
. Rotate the cam on the glass toward the center.
3. Tilt the glass out, lift and release it from the track.
4. Set the glass on a towel out of the way.
5. Remove the logs and bricks. To remove the brick, unfasten the brackets located on the
right and left.
6. Unfasten the brick support plate fastened to the burner.
7. Remove light box by removing the screw in front of the light box and pull up and over to
the left out of the way.
8. Unfasten the rectangular plate located at the rear of the firebox by only removing the six
(6) screws around the perimeter of the plate.
9. Lift the plate up and slide to the left. You may have to rotate the plate to clear the blower
through the hole.
10.Disconnect the two () wires to free the blower.
11.Reassemble the blower in reverse order.
FP2681
blower install
Brick Panels
Glass Door
Assembly
Brick Support
Blower Assembly
FP1963
Figure 43 -
Blower Removal and Assembly
Light Box
Fettle
Andirons
