28
20308184
VFF Vent Free Fireplace System
SPLIT TIMBER 24ST-R LOGS /STONEY
CREEK SC24-R LOGS PLACEMENT
1. Place bottom log (#1) on two (2) pins on rear of grate
assembly and push towards rear as far as possible.
Figure 43
Bottom Rear Log #1
Ember Chunk Log #2
(Notch on both ends)
Ember Chunk
Log #3
(Notch on
one end)
Figure 44
2. Place the ember chunk (#2) with notch on both ends
on the grate bar right side of the burner adjacent to the
controls. Push towards rear as far as possible.
Figure
44
3. Place the ember chunk (#3) with notch on one end on
the grate bar left side of the burner with notch towards
rear. Push towards rear as far as possible.
Figure 44
4. Place front bottom right log (#4) on right pin located
on burner and right grate bar.
Figure 45
Front Bottom Log #4
5. Place front bottom left log (#5) on left pin located on
burner and left grate bar. The right side of the log
should rest on log #4.
Figure 46
6. Place mid right log (#6) on bottom rear log (#1) and
front bottom right log (#4) by placing notch on bottom
of log on locating block on log #1. Place front of log in
notch of log #4.
Figure 46
Front Bottom Left
Log #5
Mid Right Log #6
Figure 46
Mid Rear Log #7
Figure 47
7. Place mid rear log (#7) on bottom rear log (#1) and mid
right log (#6) by placing notch on bottom of log onto
locating block on log #1. Right side of log will rest on
log #6.
Figure 47
8. Place mid left log (#8) on mid rear log (#7) and front
bottom log (#5) by placing notches on bottom of log
onto locating blocks on log #7 and log #5.
Figure 32
9. Place center log (#9) onto front bottom left log (#5) by
placing notch on bottom of log #9 onto locating block on
log #5. The fl at triangle-shaped end of log #9 should be
towards front with pointed end of log resting on bottom
rear log (#1).
Figure 48
Figure 43
Figure 45
