20
20304685
VC41LDVI/VC41CDVI Gas Fireplace Insert
A/C Module
Control Board
RF Receiver
ON/OFF Button
Pilot
Black / Thermopile
Red / Thermopile
Sensor
Ignitor / Sparker
Conversion
NG/LP
Plug-in Connector
Control Board to Command Center
OFF/LO
LED
ON/HI
Master Switch
Command Center
Plug-in Connector
Stepper Motor to
Control Board
DC Power/Green
Ground
Plug-in Connector
Control Board to
Solenoid
Gas In
Gas Out
Pilot Gas Tubing
Valve
A/C Module
FP2962
SCS wiring diagram
To Outlet
Optional Aux.
300 Watts
Max
300 Watts
Max
300 Watts
eLeCTRICAL INSTALLATION
eLeCTRICAL WIRING
This insert will work without any electrical supply.
Electricity is only needed to operate blower.
Verify proper operation after servicing.
electrical connections should only be performed by a qualified, licensed
electrician. Main power must be off when connecting to main electrical
power supply or performing service. All wiring shall be in compliance
with all local, city and state codes. The appliance, when installed, must be
electrically grounded in accordance with local codes, or in the absence
of local codes, with the
National Electrical Code ANSI/NFPA 70 (latest
edition)
and
Canadian Electrical Code, CSA C22.1
.
W
ARNING
Label all wires before
disconnecting when
servicing controls. Wir-
ing errors can cause
improper and danger-
ous operation.
CA
uTION
Figure 22 -
Signature Command Wiring Diagram
NOTe:
Wall switch
wires must be con-
nected together.
