![Vermont Castings Signature VCS501 Series User Manual Download Page 16](http://html1.mh-extra.com/html/vermont-castings/signature-vcs501-series/signature-vcs501-series_user-manual_1005927016.webp)
30005434
16
lighting the rotisserie Burner (if applicable)
The Rotisserie burner provides the steady, even heat required to cook poultry and roasts to self-basted
perfection.
Never stand directly over the Grill when lighting the main burners, to avoid exposure to possible flare-
ups.
T� sTarT THe r�TIsserIe BUrner:
1. Always open the Hood completely before attempting to light the Grill.
2. Always confirm that all of the burner control knobs are in the OFF position before opening the gas sup-
ply.
3. Turn on the Propane Tank Valve at the tank (1 to 2 turns) or turn on the main natural gas supply valve.
4. Turn the Rotisserie Burner Control Knob to the HIGH position, by pushing down on the knob and turn-
ing it counterclockwise.
5. Immediately push the Igniter Button. The Rotisserie burner should light within five seconds.
IF THE ROTISSERIE BURNER DOES NOT LIGHT, immediately turn the burner control knob to
the OFF position, to prevent gas buildup. Wait five (5) minutes for the gas to clear and then repeat the
preceding starting procedure. If the burner will not light when using the Igniter, follow the match lighting
instructions below.
6. Confirm that the burner is properly lit and that the flame pattern is as desired. Refer to Figures 9a, 9b &
9c for the proper flame patterns. If the flame pattern is other than normal, consult the Troubleshooting
Guide on Page 29 for corrective action.
7. Always preheat the Grill before starting to cook on the
rotisserie.
MaTCH lIGHTInG THe r�TIsserIe BUrner:
1. Always open the Hood completely, before attempting to
light the Grill.
2. Always confirm that all of the burner control knobs are in
the OFF position before opening the gas supply.
3. Turn on the Propane Tank Valve at the tank (1 to 2 turns)
or turn on the main natural gas supply valve.
4. Insert a lit match or a butane lighter into the match lighting
hole located below the rotisserie screen. (Fig. 11)
5. Turn the Rotisserie Control Knob to the HIGH position by
pushing down on the knob and turning it counterclock-
wise.
"
ROTISSERIEMATCHLITE
Figure 11
B130
Rotisserie
Lighting Hole
WarnInG
Operation