SB38 / SB44 Series Woodburning Fireplace
87D0057
31
glaSS door iNStallatioN
This fireplace has been tested and listed for use with optional Models
GDB48 and GD48B (SB38 Series) and GDB54, GD54B and GD54SS
(SB44 Series) glass doors. For installation of the glass doors, refer to
the instructions provided with the doors.
trim and door iNStallatioN
installation of Noncombustible trim materials to the front face of the fireplace
12”
Max.
M1002
Mantel install
8/08
mantel installation
Combustible Framing
Members to Top of Spacers
Combustible Mantel
Top Edge of Fireplace
18” Min. From Fireplace Opening to
Bottom of Combustible Mantel
(Manufacturer Recommendation)
Top Edge of Fireplace
Opening
M100
-
FACINGINSTALLATION
Noncombustible Facing
Material
Combustible Framing Members
Facing Material to Top of
Spacers
Figure 34
cautioN:
Do not allow any trim materials to extend closer than 3/8 inch to the vertical edges of the
firebox opening if glass doors are to be installed.
Use Only Noncombustible Materials
Below Top of Spacers
Fireplace Face
Steel Lintel
(Optional)
cautioN:
Do not cover or
restrict vent areas with any trim
materials.
warNiNg:
The space between the face
of the fireplace and the noncombustible
facing material must be sealed. Failure
to properly seal this crack can cause
a possible fire hazard and will void the
Vermont Castings Group warranty.
M101
Figure 35
FP2243
combustible surround
Combustible surround
materials may be placed
inside the shaded areas.
Combustibles may not
overlap edge of black
painted face more than
1/8”
combustible Sur-
round placement
FP43
Outline of
Fireplace
Firebrick
Extend line from opposite
rear corner of firebox past
inside opening of the front
face side panel.
Do Not Restrict
Side Air Inlets
WARNING
!
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.