10
h) Place the remaining three small coals as shown below:-
i) Finally, shut the doors on the stove. Once the doors have been shut, the handle
should be facing downward or similar.
The exact position and fit of the coals may be finely adjusted to give the most pleasing and
random appearance.
Warning
: Use only the coals supplied with the stove. When replacing the coals remove
the old coals and discard them. Fit a complete set of coals of the correct type. Do not fit
additional coals or any coals other than a genuine replacement set.
USER REPLACEABLE PARTS
The only user replaceable parts on this stove are the fuelbed components and coals,
which may be replaced as described in the above section. Replacement of any other
parts must be carried out by a competent person such as a CORGI registered gas
installer.
The part numbers of the user replaceable parts are as follows, these are available from
VERMONT CASTINGS,INC who may be contacted at the address shown on the rear
cover.
Fuelbed base
100-17920
Left Hand Fuelbed
100-17930
Right Hand Fuelbed
100-17940
Replacement Coal Set
100-17860
