Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R1 • 2019 - ___ • 03/20
6
8390-204C
1
1
Product Listing and Important Safety Information
A. Appliance Certification
D. Mobile Home Approved (USA & Canada)
•
This appliance is approved for mobile home installations
in the USA & Canada when not installed in a sleeping
room and when an outside combustion air inlet is
provided.
•
The structural integrity of the mobile home floor, ceiling,
and walls must be maintained.
•
The appliance must be properly grounded to the frame
of the mobile home with #8 copper ground wire, and
chimney must be listed to UL103 HT or a listed UL-1777
full length six inch (152mm) diameter liner must be used.
•
Outside air must be provided in a mobile home
installation.
E. Glass Specifications
This appliance is equipped with 5mm ceramic glass.
Replace glass only with 5mm ceramic glass. Please contact
your dealer for replacement glass.
!
WARNING
This product and the fuels used to operate this product
(wood), and the products of combustion of such fuels, can
expose you to chemicals including carbon black, which
is known to the State of California to cause cancer, and
carbon monoxide, which is know to the State of California
to cause birth defects or other reproductive harm. For
more information go to: www.P65Warnings.ca.gov
C. California
The Vermont Castings Encore® Model
2040-CAT-C Wood Appliance meets the U.S.
Environmental Protection Agency Certified
to comply with the 2020 particulate emission
standards using cord wood.
B. BTU & Efficiency Specifications
EPA Certification Number:
164-18
Catalytic Information
EPA Certified Emissions:
1.1 g/hr
*EPA Default LHV:
82.8%
**Actual tested HHV:
76.8%
***EPA BTU Output:
12,800 - 37,100
****Peak BTU/Hour Output:
48,000
Other Important Information
Vent Size:
6 Inch (152 mm)
8 Inch (203 mm)
Firebox Size:
2.3 cu. ft.
Max. Wood Length:
22" Maximum
Ideal Wood Length:
18" (Top Load)
Fuel
Seasoned Cordwood
(20% moisture)
MODEL:
Encore
®
Model 2040-CAT-C
LABORATORY:
OMNI Test Laboratories, Inc
REPORT NO.
0135WS042E & 0135WS042S
TYPE:
Solid Fuel Room Heater / Wood
Burning Type
STANDARD(s):
ASTM E2515, ASTM E2780, UL 1482-
2011, ULC-S627-00, CAN/CSA B415.1
ELECTRICAL
RATING:
115 VAC, 60 Hz
