9. Reverse the procedure to attached the new right side. Make sure the self-adhesive gasket is on the
front panel of the new side exactly as it was on the old side. See Fig. 19. Ensure the air plate is
properly seated on the side. The two guide tabs on the air wash manifold need to touch the front.
If the top gasket does not go back on firmly, use a small amount of gasket cement to hold in place.
Replacing Left End
10. The procedure is essentially the same with the exception of the air shutter removal. The left side
has the damper rod projecting through it. To perform the last step (step 8 above) on the left side,
the damper assembly must be loosened or removed so the side will clear the rod. The rear shroud
must first be removed. It is held on with four sheet metal screws – two per side and two head
Phillips head bolts on the center of the back.
FIG. 18 Lift Right Side From the Stove
FIG. 19 Side Gasket
