32
20306757
CSDV Series Direct Vent Gas Stove
CLEANING AND MAINTENANCE
CAUTION
Always use gloves when handling broken
glass.
W
ARNING
Make sure the glass panel edges do not
touch any metal parts during thermal
expansion.
REPLACING GLASS
1. Put on gloves.
2.
Y
ou must first remove the barrier before removing the
door.
Remove door from stove.
3. Lift up on cast front. Pivot bottom of front out and
remove.
4. Remove glass from stove by releasing two clamps on
bottom of stove. Lift glass frame up and off the unit.
Figure 41
5. Carefully remove broken glass.
6. Wrap new glass pane with tadpole gasket. Make sure
you have 1/4" overlap on each side.
7. Place new glass in frame.
8. Slide glass frame back down onto stove and fasten
two clamps.
Figure 41
9. Insert front into the top of the stove, and push forward
onto the legs.
10. Replace safety barrier.
NOTE: Use only original Vermont Castings Group
replacement parts.
Figure 41 -
Glass Replacement
DANGER
HOT GLASS
WILL
CAUSE BURNS
.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall
be installed for the protection of children and
other at risk individuals.
20306543
ST1151
replace glass
Gasket
Glass
ON
OFF
ST1153
remove glass
Clamps
Glass
Frame
Safety
Barrier
