12
DSR-3 Operating Modes
The two DSR-3's channels may be used separately or in combination, e.g. to process stereophonic
sound sources.
There are three operating modes:
STEREO, DUAL MONO and SERIAL. Use the
MODE
switch
e
to select the operating mode.
DUAL MONO
Figure 5:
INPUT
SPRING REVERB B
SPRING
EQ
OUTPUT
GAIN
MIX
INPUT
SPRING REVERB A
SPRING
EQ
OUTPUT
GAIN
MIX
signal flow in dual mono mode
The center position of the
MODE
switch sets the DSR-3 to
DUAL MONO mode.
Here, both channels
SPRING REVERB A and SPRING REVERB B work independently, as if you
had two separate spring reverberation units.
Each channel can be fed with individual signals and offers a proprietary set of controls.
Only when using the front panel input
q
, the signal is send to both channels
SPRING REVERB A
and
SPRING REVERB B in parallel. This way, you may add two different reverb effects to the same
signal.
Summary of Contents for DSR-3
Page 1: ...Bedienungsanleitung User Guide DSR 3...
Page 17: ...16...
