LCD screen
vE - 2015-10
5
2. Error codes
If the trouble indicator is shown on the screen there is possibly a fault. The number indicates the
problem.
Number Problem
/Fault
Checks
1
The battery needs charging or there is a bad connection
to the battery.
Check the connections to the
battery. If the connections are
good, try charging the battery.
2
There is a bad connection to the motor.
Check all connections between
the motor and the controller.
3
The motor has a short circuit to a battery connection.
Contact your specialist dealer.
4
The freewheel switch is activated or the manual brake
disengagement mechanism is operated.
Check the position of the switch
or lever.
5
Not used.
6
'The main controller is being inhibited from driving.
Inhibit 2 is active. This may be because the battery
charger is connected or the seat is not in the driving
position.
Check battery charger is
connected.
Check the seat is in the driving
position.
7
A throttle fault is indicated.
Make sure that the throttle is in
the rest position before
switching on the scooter.
8
A controller fault is indicated.
Make sure that all connections
are secure.
9
The parking brakes have a bad connection.
Check the parking brake and
motor connections.
Make sure the controller
connections are secure.
10
An excessive voltage has been applied to the
controller. This is usually caused by a poor battery
connection.
Check the battery connections.
Trouble indicator
