Vermeiren Squod, Instruction Manual, Page: 13 / 32

Squod
2013-09
Page 11
2.5 Mounting or removing batteries
L L L L
CAUTION:
Chance of pinching – Do not place fingers between the batteries and
the battery housing.
To mount the batteries in the electric wheelchair:
1. Batteries are located on the back side of the wheelchair.
2. Place the batteries on the battery housing of the wheelchair .
3. Connect the cables from the electronic.
4. Mount the bar in the two holes of the battery housing .
5. Place the battery cover on the battery housing, by placing the two holes of the battery
cover over the bar .
6. Screw the star buttons in the holes of the battery cover on each side.
7. Check that the battery housing is firmly attached.
8. Mount the seat.
To remove the batteries of the electric wheelchair:
1. Remove the seat.
2. Loosen the star buttons .
3. Remove the battery cover from the battery housing .
4. Remove the bar out the two holes of the battery housing .
5. Disconnect the cables from the electronic.
6. Lift the batteries out the battery housing .