Squod
2013-09
Page 26
* Adjusting depth of the footplates:
The depth of the footplates can be adjusted according following instructions:
1. Loosen the two screws above the
footplate.
2. Move the footplate backwards or forwards
until the desired depth. (3 positions
possible: steps 20 mm)
Position 1: hole 2 and 4
Position 2: hole 3 and 5
Position 3: hole 4 and 6
3. Retighten the screws properly.
3.4 Battery connections
L
L
L
L
CAUTION:
Risk of injury - Check that no tools or other conductive objects come
between the batteries poles, to avoid unintentionally current flows.
L
L
L
L
CAUTION:
Risk of injury, damages - Do not work in a humid environment with
batteries and electronics.
The best way to disconnect the batteries:
1. Disconnect the main negative pole (-).
2. Disconnect the positive pole (+).
3. Disconnect the bridge.
To connect the batteries use the reverse order.
3.5 Changing the batteries
L
L
L
L
CAUTION:
Risk of burns – Do not come in contact with the acid from the
batteries. See for a good ventilation of the battery compartment.
The batteries shall be changed by trained personnel. Refer to paragraph 2.5 for mounting
and removing batteries.
3.6 Tyre changing
L
L
L
L
CAUTION:
There must be no air in the tube before the tyre can be removed.
L
L
L
L
CAUTION:
Risk of damage - If handled improperly, the rim might become
damaged.
-
Battery
+
+
Battery
-
24
V
30
A
red
red
Black
Bridge
Summary of Contents for Squod
Page 1: ...VERMEIREN Squod I N S T R U C T I O N M A N U A L ...
Page 31: ......
