Navix
2012-04
Page 12
These instructions can also used for removing the armrests.
2.6 Mounting or removing of the footrests
The wheelchair has two footrests that can be fold away to the "outside" with a 3 point
attachment system ( , , on the figure below). This system provides a stady, play-free
connection of the footrest to the seat frame.
The mounting of the footrests is done as follows:
1. Hold the footrest sideways at the outside of the
wheelchairs frame and mount the pins into the
holes .
2. Turn the footrest inwards till the pin click in the hole
of the attachment point .
3. Turn the foot plates downwards.
To take off the footrests:
1. Fold the foot plates upwards.
2. Pull or push on lever .
3. Turn the footrest to the outside of the wheelchair
until the hole comes loose of the pin from
attachment point .
4. Pull the footrest upwards until the pins come out
of the holes .
2.7 Folding the back of the wheelchair
L
L
L
L
WARNING:
Risk of injury – Make sure that both safety pins are engaged.
L
L
L
L
CAUTION:
Chance of pinching – Do not place fingers between the components
of the wheelchair.
For transport the back of the wheelchair can be completely folded to the seat.
1.
Pull gently on the back strap.
2.
The safety pins of the back come loose.
3.
Fold the backrest forward.
Summary of Contents for NAVIX
Page 1: ...VERMEIREN Navix I N S T R U C T I O N M A N U A L ...
Page 43: ... ...
